Manufacturer for Evaporator Manufacturer - Enthalpy Wheels – Holtop

Short Description:


Product Detail

Tags

Feedback (2)

Our goods are broadly recognized and reliable by users and can meet consistently switching financial and social demands of Heat Pump Ducting, Heat Exchanger Fabrication, Industrial Air Conditioner, Inspired by the rapid developing market of the fast food and beverage consumables all over the world , We are looking forward to working with partners/clients to make success together.
Manufacturer for Evaporator Manufacturer - Enthalpy Wheels – Holtop Detail:

Main features of Holtop rotary heat exchanger
1. High efficiency of sensible heat recovery
2. Double labyrinth sealing system ensures minimal air leakage.
3. Self-cleaning efforts prolong service cycle, reducing maintenance cost.
4. Double purge sector minimizes carryover from exhaust air into supply air stream.
5. Life-time-lubricated bearing requires no maintenance under normal usage.
6. Interior spokes are used to mechanically bond the rotor’s laminations to reinforce the wheel.
7. Completed range of rotor diameter from 500mm to 5000mm, rotor can be cut into 1pc to 24pcs for easy transportation, various types of housing construction is available as well.
8. Selection software for convenient selection.

Working Principle

Rotary heat exchanger is composed of alveolate
heat wheel, case, drive system and sealing parts.
The exhaust and outdoor air pass through half of the
wheel separately, when the wheel rotates, the heat
and moisture are exchanged between the exhaust and
outdoor air. The energy recovery efficiency is up to
70% to 90%

rotary heat exchanger

Wheel Materials rotary heat exchanger3
The total heat wheel is made by aluminum foils coated with
3A molecular sieve of 0.04mm thickness. rotary heat exchanger2
Applications
Rotary heat exchanger can built in air handling unit (AHU) as a main part of the heat recovery section. Usually side
panel of the exchanger casing is unnecessary, except that bypass has been set in AHU.
 rotary heat exchanger application
It can also be installed in the ducts of ventilation system as a main part of the heat recovery section, connected by
flange. In this case, side panel of the exchanger is necessary to prevent leakage.  rotary heat exchanger application 2
Note: casing type and segment quantity should depend on the application spaces as well as transportation capability
and conditions at installation. Over segmentation will increase the assembly work, and overlarge size will cause
diffculties in transportation.
Application conditions
- Ambient temperature: -40-70°C
- Max face velocity: 5.5m/s
- Max pressure on casing: 2000Pa

Product detail pictures:

Manufacturer for Evaporator Manufacturer - Enthalpy Wheels – Holtop detail pictures


Related Product Guide:
Head to Head Analysis: ROTORK PLC/ADR (RTOXY) & UGI (UGI) | Air Ventilation System
Global Energy Recovery Ventilator (ERV) Market Analysis 2013-2017 & Forecast 2018-2023 By Product Type, Capacity (CFM) Output, Installation Type, End Use Application & Region – ResearchAndMarkets.com – Press Release | Silent Ventilation Fan

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and growth, we're going to build a prosperous future together with your esteemed firm for Manufacturer for Evaporator Manufacturer - Enthalpy Wheels – Holtop, The product will supply to all over the world, such as: Danish, Netherlands, Guatemala, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.
Heat Recovery Ventilator
Single Room Heat Recovery Ventilator
commercial heat recovery ventilator
Heat Recovery Ventilators
Hrv Heat Recovery Ventilator
Ductless Heat Recovery Ventilator

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
5 Stars By Mark from Turkmenistan - 2015.12.28 15:18
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
5 Stars By Dominic from Malawi - 2016.06.25 12:48

Related Products